Model 1101-G
A basic unit for checking:
- Blind hold depths
- Concentricities
- Lengths
- Diameters
- Shoulder lengths
IDEAL FOR USE WITH OTHER ECONO-CHECK ACCESSORIES.
Model 1101-G includes:
- 4 3/4″ x 5 1/2″ Base Plate (Precision Ground Finish)
- No. 102 1″ x 9″ Upright Post (Ground and Polished)
- No. 103 AGD Indicator Support Bracket.
- Less Dial Indicator.
Model A-Group includes:
A compact multi-purpose unit for checking external dimensions of–
- Plain diameters
- Snap-ring groove diameters
- O-ring groove diameters
NOTE: THIS UNIT POSITIVELY LOCATES PART FOR RAPID CHECKING.
Model A-Group includes:
- No. 1101-G-DT Econo-Check
- No. 106 Parallel Fixture
- No. 106-A Groove bar
- No. 107 90° Angle Fixture
- No.107-A Ground Guide bar
- No. 109 Indicator point adaptor
- Selection of contact points
- Less Dial Indicator
Model B-Group
A single post unit jwith removable platen. For checking–
- Counterbore depths
- Recess depths
- Shoulder lengths
- Indispensable for locating internal and external grooves and forms
Model B-Group includes:
- No. 1101-G Econo-Check
- No. 108 G Platen
- No. 108-A Guide Stops–pair
- No. 109 Contact Point Adaptor
We suggest these optional items to be requistioned with the Model B
Group: No. 108-B Spring Retainer Assembly. Selection of Contact Points and Hooks.
Model 201-P Base
Precision Ground Finish for Two-post Unit
Can check several dimensions at one checking station.
Permits use of several Econo-Check accessories
Provides multiple checking stations
Indispensable for locating internal and external grooves and forms
Model 201-P Base includes:
- No. 1101-G Econo-Check
- No. 108 G Platen
- No. 108-A Guide Stops–pair
- No. 109 Contact Point Adaptor
We suggest these optional items to be requistioned with the Model B-Group: No. 108-B Spring Retainer Assembly. Selection of Contact Points and Hooks.
Model 201-G-DT-Base
Precision Ground Finish for Two-post Unit
- Permits use of several Econo-Check accessories
- Provides multiple checking stations
- Can check several dimensions at one checking station
- Groove Locations
- Groove Diameters
Model 201-G-DT-Base includes:
22 (1/4″ – 20 UNC) drilled and tapped holes to accommodate attachment of Econo-Check accessories. This Model can be ordered with a variety of components to assemble a versatile checking unit. (Base plate only.)
Universal Support Bracket (No. 103)
- The universal bracket provides firm support through attachment to indicator lug.
Universal Support Bracket (No. 113)
- with 3/8″ diameter hole to accomodate stems n AGD indicators and air jets.
Universal Support Bracket (No. 111)
- The 5/8′ sliding rod permits horizontal adjustment and swivel of indicator.
Universal Support Bracket (No. 313, 316)
- No. 313 – Lug Back Mounting Indicator Bracket. Suitable for an indicator that has a Lug Back that can be turned to the horizontal position.
- No. 316 – Lug Back Mounting Indicator Bracket. With fine adjustment.
- The above brackets are designed to allow vertical and directional adjustment on a 1″ diameter post.
Platen (No. 108-G)
- Platen with 4 1/2″ x 4 1/2″ ground finish working area. Illustrated with 108-A ground Guide Stops and No. 103 Indicator Support Bracket. Ideal fixture for checking depths, recesses, shoulders, internal and external groove locations. Less Dial Indicator.
contactÂ
Phone
(918) 437-1174
wlriggs@econocheck.co
fax
(918) 437-1175